After you’ve installed the DC 200 S and turn on the truck ignition, the DC 200 S will run through a series of lights to indicate connection. The first connection it detects is the JBUS – the light turns red to green. After that, it runs through GPS, Bluetooth, Wi-Fi and Cellular connectivity, turning red to green.

1) Download or update the DriverConnect app to your smartphone, tablet, or Rand McNally device. If using a Rand McNally GPS or Tablet: The DriverConnect app comes pre-installed on TND 740, TND Tablet 80, and OverDryve Pro devices. Connect to Wi-Fi to check for and install any software updates before proceeding with setup. If using an Android or iOS smartphone or tablet: Download the DriverConnect app from Google Play or the App Store 2) Plug the Y cable that comes with the DC 200 into the vehicle diagnostic port. 4) Connect the other end of the cable into the DC…

After you’ve installed the DC 200 and turn on the truck ignition, the DC 200 will run through a series of lights to indicate connection. The first connection it detects is the JBUS – the light turns red to green. After that, it runs through GPS, Bluetooth, Wi-Fi and Cellular connectivity, turning red to green.

The DC 200 plugs into your vehicle's JBUS diagnostic port using a single Y cable. It works with both 6 and 9 pin ports, as well as type 1 and type 2. Electronic logging information is transmitted to the Rand McNally DriverConnect app via Bluetooth. Within the app you can view, certify, and email logs, complete DVIRs, and more. Using the built-in cellular modem, data is transmitted to the DriverConnect web portal, where reports are stored for six months.

The audio file-formats supported on OverDryve using the built-in Music player are: MP3 WAV AAC FLAC MKV OGG

This article is for users who purchased the 2018 Rand McNally Best of the Road Atlas & Guide at Costco and are attempting to install the free digital version of the 2018 Road Atlas on an iPad. Instructions for Installing Make sure you have the iBooks app installed on both your iPad. Follow the instructions in the purchased 2018 Rand McNally Best of the Road Atlas & Guide to download the PDF file to your computer Follow these instructions to copy the PDF file from your computer to your iPad.

1. From the TND™ 740 home screen, tap the icon in the lower left corner 2. Under General -> System Settings, tap the System Settings button 3. On the Settings screen, tap Display 4. From the Display page, tap Brightness level and slide the icon to adjust brightness settings

How to Update OverDryve Devices: All OverDryve updates are free and easy to download over Wi-Fi. Before you begin, please be sure to follow these tips for a successful update: Make sure your tablet is plugged into a charger to avoid interruptions in the download and installation process. Connect your device to a reliable Wi-Fi connection. Do not launch the GPS application once the download/installation process has started. First, determine your device's model number. Because updates differ based on model number, you must first determine which model number you have. Settings → About Tablet → Check Model Number This software…

For Rand McNally Tablets You can download DriverConnect from the RM Marketplace For Android devices Using your Android device, go to https://play.google.com/store/apps/details?id=com.randmcnally.driverconnect For iOS devices Using your iOS device, go to https://itunes.apple.com/us/app/driverconnect-by-rand-mcnally/id1213484578

It is possible that you have installed the Wireless Backup Camera per “Installation A” as described in the Quick Start Guide. This installation always delivers power to the Wireless Transmitter / Camera and requires that the Wireless Backup Cam application be launched manually on OverDryve. For this configuration (Installation A), it is also critical to go to the Settings screen of the Wireless Backup Cam app and set the “Type of Install” to “Continuous Power Source.”

There are two types of installation supported; and we highly recommend “Installation A” as described in the Quick Start Guide. This is the installation needed to make sure that the app comes on by itself when the car is placed in Reverse. This installation involves wiring the power input (for the camera / receiver) to one of the Reverse Lights. You also have to ensure that, within the Settings screen of the Wireless Backup Cam app, you have set the “Type of Install” to “Reverse Light”. This ensures that the application launches every time you place the car in reverse.

The Reverse lights and Brake Light wires are often in close proximity. Your installer may have wired the power to the Wireless Transmitter / Camera to the Brake lights accidentally. The solution is to undo the t-tap connection from the brake light and move it to the reverse light. See your professional installer or the vehicle documentation if you are unclear on how to locate the wiring.

Yes. The wireless backup camera is compatible with most Android and iOS devices, and with OverDryve connected car devices.

While many users will opt to install the camera themselves, the process can vary in complexity based on the make and model of your car. If you'd like to have the wireless backup camera professionally installed on your vehicle, we recommend the Geek Squad team at Best Buy. Learn more about their installation service.

You can press the “Set” button on the receiver to mute the audio alert for 1 minute. If you know that you are going to be addressing your tire pressure soon and want to stop the alerts, press and hold the button on the receiver for 5 seconds to turn it off.

Replace Sensor Battery If you have a sensor that is not responding, try replacing this battery, especially if you are getting a low voltage notification within your app. The sensors are each powered by a single CR1632 Lithium coin-cell battery. Replace Lost or Non-Working Sensor If changing the battery does not work, and your product is still under warranty, contact customer support for a replacement If you are out of the warranty period, you can purchase replacement sensors available at store.randmcnally.com/tpms-replacement-sensor-single. To install the replacement sensors, within the App, tap “Replace Sensor”. Follow the on-screen cues to perform the replacement.

Yes. In addition to OverDryve, there is also a TPMS app that supports Android and iOS devices. You can download and install the app on the Google Play Store or the iOS App Store.

If the OverDryve is attached to the Smart Mount, you must use the AUX port on the Smart Mount.

First, restart your OverDryve. You can do this by holding the power button for 3 seconds and then pressing Power Off on the screen. The unit will then turn off. To turn it back on, hold the power for 5 seconds, or until you see the Rand McNally logo. If this doesn’t help, refer to the article Help for Connecting with Bluetooth.

Rand McNally has designed OverDryve™ for speed and reliability. However, from time to time, all Android devices run into problems. If your unit becomes unresponsive for any reason, it’s always best to restart the unit by turning it off and on again. Restarting the Device Restart the unit by holding down the power button for 3 seconds, or until you see the Power Off screen. Press Power Off. Once the unit has shut down, press and hold the power button for 2 to 4 seconds to turn it back on. If the unit is unresponsive and you don’t see the…

Yes, the OverDryve accepts up to a 32 GB microSD card.